Recovery of solid fuel from municipal solid waste by hydrothermal treatment using subcritical water

Hydrothermal treatments using subcritical water (HTSW) such as that at 234 °C and 3 MPa (LT condition) and 295 °C and 8 MPa (HT condition) were investigated to recover solid fuel from municipal solid waste (MSW). Printing paper, dog food (DF), wooden chopsticks, and mixed plastic film and sheets of polyethylene, polypropylene, and polystyrene were prepared as model MSW components, in which polyvinylchloride (PVC) powder and sodium chloride were used to simulate Cl sources.While more than 75% of carbon in paper, DF, and wood was recovered as char under both LT and HT conditions, plastics did not degrade under either LT or HT conditions. The heating value (HV) of obtained char was 13,886-27,544 kJ/kg and was comparable to that of brown coal and lignite. Higher formation of fixed carbon and greater oxygen dissociation during HTSW were thought to improve the HV of char.Cl atoms added as PVC powder and sodium chloride to raw material remained in char after HTSW. However, most Cl originating from PVC was found to converse into soluble Cl compounds during HTSW under the HT condition and could be removed by washing.From these results, the merit of HTSW as a method of recovering solid fuel from MSW is considered to produce char with minimal carbon loss without a drying process prior to HTSW. In addition, Cl originating from PVC decomposes into soluble Cl compound under the HT condition. The combination of HTSW under the HT condition and char washing might improve the quality of char as alternative fuel.     

Liquefaction process for a hydrothermally treated waste mixture containing plastics

Most landfilled plastic waste is a mixture or is in the form of composites with incombustible wastes such as glass, metals, and ceramics. After hydrothermal treatment, including a steam-explosion process, the separation of mixed waste (MW) into organic and inorganic substances becomes easy. However, the effect of hydrothermal pretreatment on the subsequent liquefaction of organic substances from MW is not obvious. In this study, the effects on the liquefaction of polystyrene and high-density polyethylene are discussed. Moreover, optimum conditions for the liquefaction of organic substances from hydrothermally treated MW are identified. By means of this hydrothermal pretreatment, including the steam-explosion process, polystyrene and high-density polyethylene can be significantly converted to oil by liquefaction at 300°–400°C. In comparison with liquefaction of hydrothermally pretreated mixed waste (HMW) at 300°–400°C with a batch type reactor, the yield of oil increases significantly on liquefaction using a semi-batch type reactor. It is considered that the radical chain and termination reactions among the radicals from HMW were inhibited in the semi-batch type reactor. On liquefaction of HMW in a semi-batch reactor, the conversion of HMW to oil was enhanced on increasing the liquefaction temperature to 350°C and the holding time to 60 min. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

CDM in the Kyoto Negotiations:

The Clean Development Mechanism (CDM) under the Kyoto Protocol to the UN Framework Convention on Climate Change (UNFCCC) has its origins in the decade of UNFCCC negotiations. ‘Joint implementation’ and ‘activities implemented jointly pilot’ opened the door for the project-based mechanisms between developed and developing countries. The US proposal of the Joint Implementation in the Kyoto Protocol negotiations was almost identical with CDM approved in Kyoto; however, a detour around the Clean Development Fund (CDF) concept raised by Brazil in the negotiations catalyzed the mutual understanding on the win-win nature of the concept of joint implementation.CDM has been played an important role to bridge the developed and developing countries in its development process initiated as the joint implementation in the UNFCCC, and can lead to the cooperative future in the implementation stage starting from the year 2003, including the development of future commitments beyond 2013. This revised version was published online in August 2006 with corrections to the Cover Date.     

Research to develop a predicting system of mammalian subacute toxicity (3) construction of a predictive toxicokinetics model

A new predictive toxicokinetics model was developed to estimate subacute toxicity (target organs, severity, etc.) of non-congeneric industrial chemicals, where the chemical structures and physico-chemical properties are only available. Thus, a physiological pharmacokinetics model, which consists of blood, liver, kidney (these were experimentally found as major toxicological targets), muscle and fat compartments , was established to simulate the chemical concentrations in organs/tissues with pharmacokinetic parameters by means of Runge-Kutta-Gill algorithm. The pliarmacokinetic parameters, i.e. absorption rate, absorption ratio, hepatic extraction ratio of metabolism and renal clearance were calculated by using separately established Quantitative Structure-Pharmacokinetics Relationship equations. The developed predictive model was then applied to simulations of 43 non-congeneric industrial chemicals. The chemical concentrations in organs/tissues after single oral administration were simulated, and their maximum concentrations (Cmax's) and area tinder the concentration-time curves (AUC's) were calculated.Fast Inverse Laplace Transform was newly applied for the purpose of simulation of 28-day repeated dose toxicity.Simulated concentrations of 28 days repeated dose were, however, found to be the same as those of simple repetitions of a single administration per day because of the short half-lives of non-congeneric industrial chemicals.A comparison of subacute toxicity data with Cmax's and AUC's in a single dose scenario suggested that the organs/tissues with relatively high concentrations of tested chemical substances were the most sensitive targets within a chemical.Chemical concentrations in liver, for instance, were correlated with the severity of hepatotoxicity among the chemicals. It was also suggested that to improve and widen the present approach, data of metabolite and reactivity of non-congeneric industrial chemicals to organs/tissues, receptors, etc. should be incorporated into the model.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in sediment, soil, fish, shellfish and crab samples from Tokyo Bay area, Japan

Concentrations of tetra- to octa-chlorinated dibenzo-p-dioxins and dibenzofurans in samples collected in or near Tokyo Bay, Japan, with a densely inhabited catchment area, were congener-specifically determined and discussed. Analyzed in this study were samples of surface sediment covering the whole bay area, reference soil representing atmospheric impact, and fish, shellfish and crab commonly consumed as food. The range of concentrations were comparable to or higher than those in other parts of Japan. The origins of these compounds in the catchment area of the bay were investigated in terms of homolog and isomeric compositions in the sediment samples. Biota-sediment accumulation factors for benthic species declined as the degree of chlorination increased.     

Arsenic compounds accumulated in pearl oyster Pinctada fucata

We investigated the water-soluble arsenic compounds present in the soft tissues of both the pearl-free and the pearl-containing pearl oysters. After dividing the soft tissue into five parts, i.e., adductor muscle, foot, mantle, viscera and gill, each part was analyzed by high-performance liquid chromatography-inductively coupled plasma mass spectrometry for the arsenic compounds accumulated in it. Arsenic concentration of each tissue part ranged from 22.1 to 45.7 microg g(-1) of dry tissue in the pearl-free pearl oyster and from 27.4 to 50.4 microg g(-1) of dry tissue in the pearl-containing pearl oyster. On the grounds of the present evidence the major water-soluble arsenic compound accumulated in each part was identified as arsenobetaine without exception in both types of pearl oysters (94.3-99.7% in the pearl-free pearl oyster and 87.2-99.7% in the pearl-containing pearl oyster). Trace or small amounts of arsenic compounds including tetramethylarsonium ion and arsenocholine were also detected in some parts. The levels of these minor arsenicals were a little higher in pearl-free pearl oyster than in the pearl-containing pearl oyster. This study confirms the hygienic safety of the soft tissues of both the pearl-free and the pearl-containing pearl oysters, as food.     

A "spare" compensates for the risk of destruction of the elongated penis of earwigs (Insecta: Dermaptera)

Male animals in several groups have multiple intromittent organs that outnumber the corresponding female gonopore. In Dermaptera (earwigs), males of the family Anisolabididae have paired, elongated male intromittent organs (virgae), while females have a single sperm-storage organ (spermatheca). Several authors have assumed that one of the paired virgae is non-functional, because it points in the "wrong" direction. We investigated the mating success of handicapped males of Euborellia plebeja in which one of their paired virgae was removed experimentally. These handicapped males succeeded in inseminating a mate. Males with genital damage are found in the field, suggesting that the "spare" functions under natural conditions. Based on phylogenetic information on earwigs, we discuss possible evolutionary scenarios for this genital peculiarity.